Best Drill Bits for Hardened Steel

High Speed Steel Drill Bit for Professional Duty – 7 pcs German Steel product – with Metal CaseDrilling through wood and plastic is easy if you choose a proper drill bit type. But drilling through hardened steel is quite tough. Here, you cannot use any universal or ordinary drill bit.

If you choose a wrong drill bit here then you may mess up with the whole job.

Are you looking for cheap Drill bits for hardened steel?

We will drive you through complete technical & pricing comparisons for hardened steel.

…In a Hurry?

See Our #1 Drill Bit Set at Amazon that has a high stars rating and many customer testimonials.

Top 5 Hardened Steel Drill Bits Reviews

As a rule of thumb, we normally choose a drill bit of a harder material but this is just not the case here.

Before we dig in deeper please read to have more clarity on the nomenclature that is helpful to understand and choose the best one for your job.

Read Also: Best Drill Bit Reviews

A strong heat-treated HSS drill bit is required for this job. High-speed steel is an iron-based alloy that may contain Cobalt, Titanium, Zirconium, Vanadium, etc. Commonly it is cobalt included.

For an easy approach just grab a Cobalt HSS to drill through-hardened steel.

Let us see the top-rated list of Drill bits around.

#5 Metric M42 8% Cobalt Twist Drill Bits Set

Cobalt drill bits that are of premium quality as you can see 8% cobalt is there. This gives a very polished surface to the drill bit. These Cobalt drills are cable to run 3 to 5 times.

Price id a bit higher for this particular drill bit set due to cobalt percentage but if we count as ‘Hole’ per buck then we are quite fine.

The split point is 135 degrees mean it is good for hard and tough materials.

Sharp edges of bit produce long chipping that ultimately will reduce friction & heat.

>>> Check the Latest Irwin Drill Bit Amazon Prices >>>

Pros
  • Three-step design starts drilling immediately, no ‘Walking’

  • Premium Quality 19 pieces enough for any job requirement

  • Can go through Hardened steel smoothly

  • Cobalt alloy increases the life span & durability

  • Variety of sizes are available

Cons
  • Costly but produces more ‘Holes’

What’s Our Take…..

A premium look and quality give you extra reliability when drilling through tough surfaces. No chips and no mess like grinding due to powder formation. These bits are capable to work faster 3-5 times than that of the ordinary in the market available.  These bits can also cut through stainless steel, and hardwood, and softer materials like plastic & aluminum.

#4 COMOWARE Cobalt Drill Bit Set

COMOWARE Cobalt M35 Drill Bits are also of good quality with 5% of Cobalt included in steel alloy.

It has a gold finish and round straight shank. These are available at a lower price than the Metric 42%. The reason is the same low Cobalt than Metric bits.

It can cut through hardened steel as well as Cast Iron, high-temperature alloys, titanium alloys, hard plastics, and hardwoods – Aluminum also can be drilled.

>>> Check the Latest Comoware Drill Bit Amazon Prices >>>

Pros
  • M35 means 5% of cobalt and hence cheaper

  • 135° split angle to make it faster

  • You can drill a number of materials.

Cons
  • Separate lubrication is also required.

What’s Our Take…..

Perhaps these are the cheapest ones available in the market with the best quality. Hardened steel needs extra care while drilling through but this 135-degree angle helps to make a concentration point easily. 15 pieces are available and are enough for any job. Use some lubrication while drilling as these don’t have butter lubrication.

#3 Amoolo Cobalt Drill Bit Set

Amoolo Cobalt Drill Bit Set also contains 5% of cobalt – M35 Cobalt High-Speed Steel. The good thing is Amoolo gives you 90 days refund and a 100% cash refund in case if anything went wrong as per their described specifications.

Cobalt drill bits are of high quality and is used by the professionals. Cobalt addition makes an iron alloy the increases the strength and toughness of steel and hence the life of a drill bit.

>>> Check the Latest Amoolo Drill Bit Amazon Prices >>>

Pros
  • No center punch needed.

  • Steel Industry grade 6542 is used that is harder than 4241 HSS used in other similar drill bits set

  • 13 pieces at a low price

Cons

What’s Our Take…..

Amoolo Cobalt Drill Bit Set is preferred as it is under the supplier’s warranty with a full refund at Amazon order. These drill bits are with guides to use and how to do it. We like it because of the refund policy if you are not satisfied.

#2 LETON HSS M35 Cobalt Drill Bit Set

LETON HSS M35 Cobalt Drill Bit Set is best if you are a casual user and looking for cheaper and the best of your price. This is the same M35 with a 5% cobalt HSS alloy. These can drill through tougher materials as well as with hardened steel.

It can be used in stationary,  press drill machines like a radial drill, bench drill or hand drill chuck for drilling operations.

>>>> Check the Latest LETON HSS Drill Bit Amazon Prices >>>

Pros
  • Best for bore machining

  • 135° split angle needs not the center punch

  • Drilling through tough metals made easy.

  • Cobalt alloyed HSS helps to improve heat resistance.

Cons
  • Separate lubrication is also required.

What’s Our Take…..

LETON HSS M35 Cobalt Drill Bit Set is designed specifically for bore machining that means it can deal with much more tough materials at a high speed. This twist drill with round shank has sharp spiral grooves. This can also deal with Aluminum, wood, malleable cast iron with ease.

#1 DEWALT Titanium Drill Bit Set

DEWALT Titanium Drill Bit Set is our top priority not because of it’s brand but for the quality and reliability. This is Titanium Pilot Point gives an extra edge life. These bits give maximum speed and life in stainless steel and other hard metals.

It’s tapered web gives greater durability to reduces the breaking of drill bits. Sizes are included from 1/16-inch to 1/2-inch in a hard case.

>>> Check the Latest DeWalt HSS Drill Bit Amazon Prices >>>

Pros
  • The nice gold finish of bits

  • 14 Pc with Pilot Point tip longer life than black oxide
  • A pilot point tip eliminates walking.

  • Minimum cost to deal hardened steel

  • Bits are OK with any standard drill

Cons
  • A bit costly

  • Need to clean tips often.

What’s Our Take…..

Titanium coating is always preferable as it gives extra life at a minimal cost. We can say it is the best available in the lot as you can use these for many purposes. This titanium coating helps to get 3 times more holes than that of ordinary black oxide drill bits.

Take-Home Point

Try to grab maximum possible information about your project. This is always advisable to count the number of holes. This will help to choose any preferred drill bit set. No need to go behind the brands until you have an extra budget and need more quality.

Make sure to estimate your project duration and the budget. If you are high on budget and looking for a longer project/projects then always go with brands like Dewalt, Bosch, Drill America. Another thing always sees if it made by America, Japan, Germany, etc.

FAQ’s and Answers

What are the best drill bits for hardened steel?

Cobalt bit which is a type of HSS is specifically designed for this job.

Is cobalt or titanium drill bits better?

Cobalt has a bit edgy as it is considered harder than Titanium.  With cobalt, you will have a well-polished surface on your drill bit.

How do you drill through hard steel?

Slow speed, proper drill bit and the drill machine. Do follow the instructions and here you go. At the start, use Stub the shorter bit and the go for jabber if required a longer hole. Also, maintain the optimal speed during drilling. You can adjust it from the drill machine. Avoid hammer operation also.

Can you soften hardened steel?
Yes, annealing is the process to do it. It is a long and costly process and is done in the industry. Like putting the hardened steel piece in a gas-fired furnace as per the annealing cycle of that particular steel type.

Are cobalt drill bits worth it?

If your job is to drill through hardened steel or any tough material then it is OK to go with it. As I said earlier, we are going to buy the ‘Holes’, not the bit. Cobalt drill bits are the best ones for hardened steel.

Do you need a special drill bit for metal?

Yes, as regular drill bits may ruin itself and mess up your project.

What is the right design for drill bits meant for hardened steel?

Cobalt & Titanium HSS alloy based drill bits are recommended for hardened steel. These bits are strong and reliable.

How can I sharpen my drill bits?

Yes, but before this read the buyer’s guide and recommendations well. The sharpening of drill bits has become very popular nowadays. A bench grinder or a costlier diamond file will be helpful.

Does the length of the drill bit matter?

Yes, stub or shorted bits are preferred unless you need a deeper hole. still, at the start, it is preferred to use the shorter one.

What is the common high-speed steel for bits?
There are 5 levels of HSS drill bit grading;

  • T1 – Tungsten Steels
  • M1 – Molybdenum High-Speed Steels (HSS)
  • M2 – Molybdenum High-Speed Steels (HSS)
  • M7 – Molybdenum High-Speed Steels (HSS)
  • M50 – Molybdenum High-Speed Steels (HSS)
  • M35 – 5% cobalt
  • M42 – 8% cobalt

The best one is with higher cobalt percentage here. You can read more about these are at Wikipedia

What are the different uses of Hardened Steel?
This is used in car parts, cranes parts, trucks parts, guns, knives,  etc.

~Happy Drilling~

Read More: Masonry Drill Bits, Wood Drill Bits & Drywall Drill Bits

FEATURED POSTS


Porcelain Drill Bits
Porcelain tiles have taken over the ordinary ceramic tiles. This mainly because porcelain tile sare more good aesthetically….

Porcelain Drill Bits

Ceramic Drill Bits
Ceramic Tile Drill Bit Is An Efficient Drill Bit To Bore Deep And Wide Holes In Ceramic Tiles With Efficiency…

Ceramic Drill Bits

Carbide Drill Bits
Carbide drill bits are some of the most used drilling tools on the market today. These high-strength carbon steel ….

Carbide Drill Bits

Masonry Drill Bits
A drill bit is an equipment that is utilized in creating holes that are generally cylindrical. A drill is a tool that is used….

Masonry Drill Bits

Best Drill Bits
Whether you are on the job site or puttering around the house, a drill bit set is a necessary component of any working…..

Best Drill Bits

Drill Bits Extension
A drill bit extension is a lifesaver when you need to drill through materials that are more than twelve inches thick….

Drill Bit Extension

Glass Drill Bits
Diamond is the only harder material than glass and hence you can only use Diamond Drill Bits for glass!…..

Glass Drill Bits

Wood Drill Bits
Drilling through the wood is easy? The answer is yes. as wood is normally a soft material. But it may…

Wood Drill Bit


1 thought on “Best Drill Bits for Hardened Steel”

  1. The great things of your article you talk about the hidden things which is the common high-speed steel for bits. I used DEWALT Titanium Drill Bit Set which is undoubtedly a good choice for newbie and I also recommend COMOWARE Cobalt Drill Bit Set. Amazing thoughts ..

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top